Brother LS-2125 Mechanical Sewing Machine "threaded right" Questions

How to thread a Frister and Rossman 35 Presser foot up, takeup lever at the top, thread on the top spool pin, take the thread to the left and over the top guide, straight down the right hand side of ...

...threaded in this order: 2nd thread from the right (upper looper), last thread on right (lower looper (this thread must cross over the top of the upper looper in the final step!!!), then the ...

threaded by overlocker right (Riccar RL 913) but the stitching aint right, threads not weaving together, Needle is stitching on top but no back stitches while the lower & upper loops just trail along.

The thread is loose at bottom When the bobbin thread shows on the right side, the needle tension is too tight or the bobbin thread, too loose, as shown in the middle drawing at right. When the needle ...

My bobbin winder will not engage 1. Turn the power on the machine. 2. Open the bobbin winder cover at the top on the right side of the sewing machine. 3. Swing up the bobbin thread spool pin. Move the

brother vx-950 sewing machine i need to know how to thread the machine Place thread spool on the spool pin at back right top of machine. From there, thread through 1) rear thread guide (little hook), ...

underneath of quilt the stitches are long with smaller topstitches is my top tension to loose or too tight YOur top thread is looping, right? Re-thread your top thread, making sure you floss it into ...

White 2037 Bobbin Filling Hi, I can't find my manual and haven't filled a bobbin for a few months. Do I wrap the thread around a certain way? I know I put the bobbin on the spindle on the top and ...

treading my serger i have a manual for my serger but i can't see how to do the uper looper when i get to the bottom the thread seams to run together When you thread the serger, your suppose to start ...

how to thread a singer feather weight machine To begin threading the Featherweight, use the third photo below as a guide.Put a spool of thread on the thread spindlePull the free end of the thread to ...