...the bobbin case and race/shuttle. Clean the area. Read the instructions to be sure the race/shuttle is properly reinstalled. If the bobbin remains jammed, a service tech will need to look at
Question about Kenmore Sewing Machines
...shuttle race I was sewing along fine for about two feet, then the needle jammed and had to be taken out. I cleaned the shuttle race and put it back in the machine (according to illustrations on p. 39 ...
Question about Singer Sewing Machines
...manual for your machine to see how to disassemble the bobbin shuttle and race to check for thread. It would be a good idea to put a drop or two of sewing machine oil on it while you have it
...it around a little to get it seated. Once it is seated, install the shuttle race cover and flip the levers to hold it in place. Janome Sewing Machine Instruction Book Cleaning The Shuttle Race
...in the shuttle race try a new needle try a different bobbin and make sure the bobbin is turned the correct way in the bobbin case make sure the top thread has not come off the top thread take up ...
Question about Euro-Pro Sewing Machines
shuttle below and catch the bobbin, but it won't come back up. When I open the bobbin door, the thread has looped several times around the racing shuttle and won't move without a great deal of effort.
...Other wise you run the risk of loosing yr motor. Your problem is due to something getting jammed in yr bobbin compartment. Clean shuttle race and shuttle race free of lint regularly to avoid
...or check the race, the metal track that the shuttle/hook glides in there may be something jammed into the race be very careful trying to remove a broken needle as you may further damage the ...
Question about Kenmore Sewing Machines
...shuttle hook/race (clean bobbin, hook, race) 6.Wrong bobbin (replace with proper machine bobbin) 7.Bobbin thread tension too high (reduce bobbin spring pressure, likewise top thread tension) 8.Poor ...
...Shuttle Race apart. The needle is free but I am not sure how to get it back together. I need to put back the part the bobbin sits on and the ring on top of that but not sure how it is to go back in. ...
915 questions posted
Usually answered in minutes!
337 Questions
294 Questions
223 Questions
181 Questions
150 Questions