Brother LS-2125 Mechanical Sewing Machine "proper setting straight stitch" Questions

...straight: Stitch length setting: Check that the stitch length setting is not set to zero or a very small number. If it is, the machine will only sew straight stitches. Stitch selector mechanism: It's ...

Proper Settings I have a 6300 machine. I have used it only a couple of times. I find the manual hard to understand. All I want is to sew a straight stitch on ordinary cotton fabric. I need to know the

...proper settings. This machine sewed straight stitches 2 months ago. Machine was just oiled again (by me, using manual for guidance). Nothing seems to be out of position, although I don't usually ...

...straight stitch, it will stitch 4 or 5 zigzag stitches then straight stitch and then back to zigzag, it happens when the size of the zigzag stitch goes over the 2 mark meaning anything between the 2 ...

...proper tension setting for a small straight stitch... as well as the correct color to set the stich selection knob on. thank you. Kim Please go to Kenmore model 385 1249380 sewing machine sell shop ...

...straight, and I'm sure the needle is set appropriately. I even tried switching to a different needle and was getting the same result. What could this issue be?? I'm making over $7k a month working ...

...straight stitch setting only the top 4 icons are lit The computerised screen is not working properly. Most of the icons don't work. At the moment I can only do straight stitches because the monogram ...

...setting is not static and should be adjusted each time you change projects. You should become comfortable with adjusting the upper tension so that you get the best result possible every time. If you ...

...straight stitch and reduce tension until top thread starts to appear on bottom. Then go back to zig/zag and see if it sews properly. If still dropping stitches, check the needle is not bent and is ...

...get a straight stitch. What is the little screw on the back of the machine with a + and - sign on the sides. what are the factory settings for tension...stitch size and correct  letter for ...