Brother LS-2125 Mechanical Sewing Machine "cant turn wheel" Questions

...cant turn the hand wheel. I have looked inside but cant see any obvious problem.after a few days, it worked for about 5 mins. Any ideas?Thanks in advance. Bernina 810 Seized up Yep, it has seized due ...

cant turn the wheel far either way, cleaned, wants to go but is stuck, I cant see any thread in bobbin plate but I think that is where issue is advise it is a vx-1100 brother model You could check the

...even turn it manually...i have only just used it 4 times That sounds like a thread jam. Turn off the machine and remove all the thread and check the area under the needles with a

...cant make them come up again for sewing, wheel turns but teeth dont move, any suggestions? Look at the presser foot and imagine they are at the center of a clock. Now look at 4:00. There is a ...

...cant remember but i think that that machine has a dimmer wheel on the front right next to the screen. If turning that does not fix the problem then the wheel is broken and needs to be replaced (eazy ...

...cant get the handle that goes up and down on the sewing machine some rust but not a lot from being inside. is there a wheel inside the hand wheel on the right? tighten that by holding the hand wheel ...

...cant get it to go back to the up position. How do I move it back up? turn the hand wheel that lever is what pulls the needle thread back up to complete the stitch it is connected directly to the ...

Janome MyLock 644D is jammed Motor is jammed. Cant even turn the wheel Janome Workshop Service and Repair Manuals Buy Download Janome New Home...

...turn it over by hand and when I release the wheel, the belts work just fine. Its all apart and I cant see aything wrong It needs cleaning and oiling! Do NOT run the motor until you get it taken care ...

Machine is jamming up, cant manualy turn the wheel. i was able to find it at www.ifixmachines.com