Brother LS-2125 Mechanical Sewing Machine "bobbin instructions" Questions

tension spring you can release right index finger and you will feel the resistance of the bobbin tension spring. Now finish the bobbin thread per machine instructions and use the bobbin thread trimmer

On my Pfaff 545, bobbin section of machine not turning The bobbin stays fixed and releases thread under bobbin tension. The part that moves is the hooked arm that is around the bobbin. This is ...

instructions threading the bobbin on Kenmore sewing machi I need instructions for loading and threading the bobbin on a Kenmore model 158-1930....HELP!!!!!!!!!!! I believe it is a seperate bobbin case

...instructions for Riccar 2910 need help with bobbin, threding machined and tension setting and bobbin holder. cannot figure out how to thread machine, how to set the thread tension or how to place the ...

...appears to be missing or damaged. Thanks. Can't imagine what could have happened unless it is broken. Might recheck the bobbin winding instructions again. Singer 6233 Instruction Manual Winding ...

...bobbin thread on Prolectrix 8 stitch Although I followed the instructions on how to thread the needle etc. when the needle goes down into the bobbin compartment, the bobbin remains still and in the ...

I THINK I've followed every instruction and tip regarding threading my machine and bobbin, but the needle won't pick up the bobbin thread. It just comes up as it went down, without the loop fr

...instructions for threading, including the little bobbin that goes underneath! This is a machine made under licence for Elna back in the 80's I believe. So should be a bobbin inside a bobbin case ...

...bobbin following the instruction manual. The instructions say to pull the thread down through the clamper (what's a clamper; it's not shown in the diagram) and thread through the small hole in the ...

bobbin and threading instructions can't seen to figre out how to get the bobbin thread to catch.it is a back loading bobbin,allseemstobe in order except my ability to thread the bobbin Check out these