Brother Disney PE-180D Computerized Sewing Machine "check upper lower thread cut" Questions

Ad

...Check if upper or lower thread is cut shows on The message check if upper or lower thread is cut shows on machine. I replaced the needle and re-threaded the machine. I also re-winded a new bobbin and ...

Ad

Question about Brother Sewing Machines

1 Answer

...lower thread is tangled. Upper thread is correct but lower is like along tangled threads. Sometimes it brakes needle. I checked bobbin case many times but it does anyway. The top thread is fine but ...

Ad

Question about Sewing Machines

1 Answer

...Check to be sure the left needle is installed all the way in the holder. Sometimes debris (threads, lint, etc) accumulate and prevent the needle from seating properly. Use the needle holder tool to ...

Question about Brother Sewing Machines

1 Answer

...check upper or lower thread isnt cut checked and nope so i looked at the bobbin and still quite a bit of thread on it, but wound another bobbin and went to thread it all again but the thread isnt ...

Question about Sewing Machines

1 Answer

...me to, I have totally re threaded it also, both upper and bobbin. Did you check to see if there is a piece of material / thread caught in the lower mechanism? Take the throat plate off ...and

Question about Brother Sewing Machines

1 Answer

...upper thread bunching up on underside (lower thread ok), all stitches coming out strait or partial pattern then strait try changing the needle also check the top thread tension check for lint under ...

...check that the bobbin thread is pulled thru 'the tongue' of the bobbin case: that is what controls general tension of the lower thread. also make sure the upper thread is threaded thru the tension ...

Question about Brother Sewing Machines

1 Answer

...check if upper or lower thread is cut". I have cleaned it, rethreaded it, and changed the needle and bobbin, and it still does not sew at all.It won't even make one stitch The top and bottom threads ...

Question about White Sewing Sewing Machines

1 Answer

check if upper or lower thread is cut. I have rethreaded themachine, changed bobbins, changed needle, but it still is not picking up the bobbin thread and am getting same error message. Is your needle

Question about Elna Sewing Machines

1 Answer

...upper looper thread down. I usually do a few test runs and check the stitching. Once happy, I turn the stitch length right down to 1 so it is very dense. This uses a lot of thread up. Ideally use a ...

Not finding what you are looking for?
Brother Disney PE-180D Computerized Sewing Machine Logo

67 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Irene Tulloch

Level 2 Expert

491 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...