...thread spool does not need to spin. The added pressure of spinning a thread spool contributes to tension issues (especially if you are using large thread spools that are so common now days). On new ...
...thread guide pole is broken and I need to replace you should be able to buy this part from either a local Dealer who stocks Elna or from online. try www. sewingpartsonline.com or www.sewusa.com Check ...
Question about Singer Sewing Machines
thread breakage, I unthread the machine, replace the needle, and rethread. Sometimes thread will wrap around the spool pin, so I use the upright spool pin or use a mug or water glass to hold the spool
...replace the spool pin on a babylock ellure sewing machine Place the cone of thread on your right, at the back of the machine. Bring the thread up and behind the bobbin winder spindle. (where the ...
...spool of thread, on every spool there is a small slice to hold the thread when not in use. Make sure when you put the thread on the spool holder, put the slice side on first so that it is torward the ...
...replace the needle if you hear it hit metal, if you've got a really bad thread jam, if you see it deflect as you sew (for instance, sewing over the side seam on jeans when hemming). Replace every ...
Question about Janome Sewing Machines
thread spool pin is inserted On the Janome My Style 20 there are two thread spool pins. These are inserted into two plastic housings. The spool pins can normally be pushed down and pulled up. Two wire
...thread will limit a lot of sewing problems and frustration.
Install a brand new needle every 8 hours of sewing time. Frequently, problems are a result of using old, damaged, or dull needles. ...
juki sc320 material stuck if your fabric is stuck the liklihood is that the spool underneath is jammed up with threads take out spool and clear threads replace spool, it should be ok then
...thread spool which causes it to snap at the needle. I suggest unthreading, and running your finger around the rim of the spool to be sure there is nothing for the thread to catch on. Then be sure to ...
68 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions