...sewing machine free if possiable A manual feed is used primarily in freehand embroidery, quilting, and shoe repair. With manual feed, the stitch length and direction is controlled entirely by the ...
Question about Singer Sewing Machines
...sewing. Machine won't feed material. I have to pull while sewing. First of all stop pulling that will only bend your needle and cause further problems. Check to make sure your feed dogs ...
Question about Brother Sewing Machines
...sewing machine; those are NOT embroidery stitches, they are "decorative" stitches, you need to leave your feed dogs up. up l have a snoopy pe-200 embroidery machine and it won't work on thin ...
Question about Singer Sewing Machines
...sewing machines have what is called a buttonhole lever that is to the left of the needle that has to be pulled down before the machine will make a buttonhole,here is a link for a free manual if you ...
...sewing machine. It will operate but the teeth do not move the material - so it sews over and over in the same spot. Any solutions? the problem is the feed dog is in the wrong position,, in the ...
Question about Singer Sewing Machines
sewing machine - material wont feed through I filled up bobbin, turned knobs back to normal, clicked bobbin clamp back to unclamped (and tried it clamped), but now material won't feed through
sewing machine and the a needle broke now thhe feed dog will not advance the material when I sew. The feed dog goes forward but will not go up and down. Call Singer at 1-800-4singer and they will help
...feed have a riccar 706 sewing machine can't get material to pull through foot feed you need feed teeth Pulling at a height of 1mm and you need pressure from a presser foot on the top. Check ...
Question about Riccar Sewing Machines
machine is not feeding the material through by my feed dog and t it want let it sew properly thread is cluttering up under the material and the feed dog not coming up to feed cloth through the machine
...Sewing Machine picked up at an Auction I have been trying to sew but the material will not feed through, I have to really pull the material very hard to enable the material to move I just cannot find ...
266 questions posted
Usually answered in minutes!
212 Questions
142 Questions
117 Questions
66 Questions
46 Questions
