Baby Lock Esante "39 fill bobbin" Questions

...39;t fill the bobbin! Starts ok, but immediately stops and beeps. I ensured that I had everything threaded properly so the bobbin would fill (I have done this dozens of times in the past, and have ...

...will click off before the bobbin is completely full as you don't want any thread actually touching the bobbin case when it is in position, just fill to about 80% for good tension and

...fill even. What seems to be the problem? There's a small screw on top of bobbin winder on your machine. Turn screw to adjust pressure where bobbin meets the winder when winder is pushed to right ...

...39;t fill it too full of thread. A bobbin filled too full won't stay tightly spun. Thread the string evenly on the bobbin. Move the thread back and forth evenly and in layers that are level. Many ...

...fill the bobbin and the thread is filling under the bobbin instead of inside the bobbin. Had it fix in late 2009 and it came back with this problem had it checked again and it was supposedly fixed. ...

...39;t spin to fill bobbin with thread. How do you get the top off Alternatively, for ~$30 pick up a standalone bobbin winder (Sidewinder), available at JoAnn's, Amazon. Great accessory. Saves wear and ...

...fill a bobbin on Virtuosa 150 Put the thread spool on the vertical spool holder with a sponge pad underneath. Wind the thread off the spool and through the small wire thread guide next to the spool ...

...you may have the bobbin in backwards to the way it's supposed to feed. if your talking about the bobbin not winding on top to fill, you have to push the lever over that the bobbin is sitting

39;t get it to sew the wheel turns and belt is ok . It is like the wheel is frozen Do you change it after filling a bobbin? If I recall correctly, to fill a bobbin you must first release the belt from

fill. embroider very slowly. Oh wow.  That's definitely not good.  Well you'll need to replace the bobbin case, and needle plate.  Even the slightest burr can cause havoc.