...four-thread multi-function overlock machine Open up the front cover. There should be a diagram right there, and you want to thread your serger step-by-step per the color-coded diagram so that the ...
...four thread ends firmly in the left hand and give each thread individually a good pull down over the serger and behind, this will ensure that the threads are all engaged in the tension dials. 8. Set ...
...thread order would be top looper, bottom looper, then right needle, left needle, turn tension to zero on all threads, pull all four threads out under the foot, loower the pressure foot, turn tension ...
...dial from right to left. Slip the thread under the following four guides Next thread the eye of the looper, and then pull the thread to the rear of the serger, leaving about eight inches of
Question about Singer Sewing Machines
...serger? Yes, there is a couple of different needle systems so you need to make sure you have the right ones as specified in your manual.Also in the 130/705H system there is a couple of ...
Question about Husqvarna Sewing Machines
...thread under the presser foot and to the left side of the serger. Set the tensions back to normal 4 - 5 usually. Lower the presser foot and hold onto the threas tails as you stitch a chain. If the ...
...four thread stitch this is probably upper looper, lower looper, then the two needles. But check the manual as it may be different on yours. Many sergers will have a threading diagram ...
...four threads, I still can't get the left needle thread to pull the lower looper thread into a balanced position. I've loosened the lower looper thread tension to nearly zero. If I keep tightening the ...
...thread not interlocking? I've threaded it and rethreaded it about thirteen times, made sure all the tensions were right. I'm using one needle, not two, as I have on every serger I've ever ...
...four-thread stitch, see page 15 for the right looper thread path. I hope this helps. Check YouTube for videos on preparing a Singer serger. Those are often more useful than the manual's pictures. ...
104 questions posted
Usually answered in minutes!
212 Questions
195 Questions
142 Questions
117 Questions
46 Questions