Baby Lock Ellure "fix locked serger" Questions

...gets "locked up" or "frozen" it requires a trip to the service department or getting a new machine. Best bet call your repairman and tell him what the problem is. You won't be able to fix it

why is my serger going faster than normal can you help Most problems with a serger can be fixed with a few simple adjustments to either the needle or the serger tension dials.Find helpful tips here !&

Serger BL-90. When it has been on for a while and I'm sewing, it starts to slow down sewing and then stops. I had it repaired twice for the same issue; but it started again Perhaps was same as

...locked up. The handwheel won't turn, and the motor buzzes but causes no movement. This happened when I was running some old threads through before putting new ones on. The old threads got ...

...fix feed dogs on it? They are not moving. Feed dogs on Baby Lock 5360E not moving? That normally happens if you are in embroidery mode, but not on a Serger. ...

...Serger that needs a part for the air threading lower looper (inside the machine). I have searched online and can't find a description anwhere of it. Can you tell me where I may find this part to fix ...

...serger! Your problem is probably the stitch length adjustment cam (located on the left side of the machine) To fix this problem you will need to remove the small plastic cap (with red arrow) covering ...

serger. I haven't been able to get the left needle thread to entwine with the thread chain. I have re-threaded, but still no go. The previous owner said all four were working when they sent it

...fix it? I have a eclipse lx baby lock serger model ble1lx . the problem I have is broken thread inside the hole for lower looper. How do I get it out. I have tried running a wire thru the port down ...

...better as they age, so take it in for servicing. Had the exact same symptoms on BL4-838D machine, fixed problem by lubricating feed mechanism drive off main drive shaft. Email me at my hotmail ...