Baby Lock Ellure "feed dog position won 39" Questions

...hand-wheel forward and the feed dogs will come up. (Providing you have the feed dog switch to the up position). it's very possible that the feed dog lever or knob is damaged & needs to be ...

...feed dogs are working. Fabric won't move threw machine, feed dogs are working. Try adjusting the pressure on the presser foot, or make sure your feed dog are in up position and moving ...

...feed dog switch to the up position). something is not put together right, (like the part that was dropped when you took it apart)  take it back apart and figure out how the feed dog drop ...

...1030 won't feed material my bernina 1030 won't feed material Make sure the feed dogs are in the raised position and that the presser foot has been lowered before beginning to

...the feed dogs, they move the fabric forward as you sew, they should be up to sew . most sewing machine have a lever or knob that can be moved to change the feed dog position, unless then knob is ...

position if the feed dogs are up & they are not moving the fabric like there suppose to, cause it's there job to move the fabric against the presser foot,, then they need to be check the gears

...feed dog won't stay raised husqvarna optima 620 feed dog won't stay raised If you have switched to "UP" position and turned handwheel one full revolution with no result it may be that 1. ...

...where the feed dog lever is at and move it in the opposite direction, if you don't have a manual, send me a commment with the name and model number of the machine and I'll try to help you find a ...

...won't pick up bobbin thread The problem seems to be with the bobbin holder. I have changed the needle and bobbin, cleaned out the feed dogs and gone through all the recommendations in the ...

...feed dog come slightly above the surface of the needle plate?  If it does.... tighten the presser foot tension.  If it doesn't locate the switch that drops the feed dog.  Make sure ...