Baby Lock Ellure "bobbin thread showing top quilt" Questions

...bobbin thread,. If your quilting thread is not the same weight (either heavier or lighter) than thread used for regular sewing, then the bobbin tension may need to be adjusted. My quilting thread is ...

...bobbin thread is showing on top, the bobbin tension may be too loose. If the top thread shows underneath, the top tension is probably too loose. Since you are having both problems, perhaps a ...

bobbin thread is showing through on front please help Loosen your top tension. If it is too tight, it will pull the bobbin thread to the top of the fabric. If it continues, then it may have to do with

...bobbin thread sensor, it could be dirty causing it to not read the bobbin correctly. When you thread the upper thread, be sure to ALWAYS RAISE the presser foot so the tension disk is released and the ...

...thread groove on the front and the back of the needle. Not tried them personally but might be worthwhile for you to consider. For the looping, you could fiddle with your tensions a little either ...

...bobbin thread loops and snarls. The machine is not currently on a frame, but I have a Grace Sturdy Light and want to put the machine in (the quilt is rolled and ready), but I am having serious ...

...bobbin thread probably should not show on the top of the sandwich. . In order to do that, I have adjusted a separate bobbin case with a slightly tighter tension that I use only for FMQ. (FWIW, extra ...

...bobbin thread showing on top or when I lower the tension the top thread shows on the bottom. This problem seems to fluctuate also. What am I doing wrong? Try tightening your bobbin tension a little, ...

Bobbin thread showing on top of quilt. how do I adjust tension? Loosen your top tension. But, I usually have to tighten the bobbin tension too for quilting. That's why I have 2 bobbin cases. One is ...

...bobbin thread needs to be loosened. At any rate, the tension is correct when the two threads meet in the middle of the fabric for general sewing.

For free motion quilting, the tension should ...