Question about Janome Sewing Machines
...wind the bobbin on a 6234 the stitch pattern knob (inner knob) must be on straight stitch. Line up the two dots that are between the zig zag markings on the stitch pattern knob. Next set the outer ...
...spindel to the right to engage bobbin fuction and the machine locks up and wont wind the bobbin. Irig did you bring it in for repair? I'm thinking its broke - which **** as mine is a brand new ...
...stitch on setting A with the singer 3116 simple, the top thread tension looks tight, and the bottom occasionally has a few very loose stitches with extra thread. i already changed the needle, and i ...
Singer 9410 bobbin problems I have a Singer 9410. When I press the indent on the hand wheel disc; it does not stop the needle from going up and down. Does this affect the way the bobbin winds? The ...
...stitch and push the bobbin wind button in. (This has a bulls-eye symbol on it.) Wrap the end of the top thread around the presser foot screw several times and hold onto the end. Step on the foot ...
Question about Sewing Machines
...wind a bobbin . The lower stitch pattern must move to the A ( which it will Do ) Please help me fix my sewing machine . Thank you for you help in advance try moving it with the stitch width set to ...
Question about Singer Sewing Machines
...stitch length on upper thread. try cleaning cleaning the tension disks, remember you tension setting,, take some unwaxed dental floss and go between the disc's to clean in them, and then reset the ...
...Stitch length set at proper length. Thread is feeding from the bobbin spool in the correct order and through the proper guides. Problem still there - take the machine and a sample of the stitching ...
wind bobbins. It either winds bobbins whilst sewing or just free wheels. I think there must be a way of adjusting this action. Hopefully you can help. Needle Faces Where? I Need to Tighten the Tension
Question about Singer Sewing Machines
...wind a bobbin. Bobbin winding will usually disable the needle bar. Could also be a worn or broken belt. If it's an older mechanical machine, it could also be in need of a good cleaning and oiling. ...
600 questions posted
Usually answered in minutes!
64 Questions
168 Questions
165 Questions
144 Questions