Bernina Artista 180 "proper dongle" Questions

...i plug in the dongle and install the dongle software it either says program could not be installed properly and that the dongle may be made for windows 98 or latter, or it goes to the blue error ...

...Professional Embroidery System Unfortunately some people are having this problem when they are not properly installing the updates. It's important that when 4D is installed that you assign a ...

.... I hope this helps. Cindy Wells (There is a patch for the v5 software to run properly under Windows 7. There isn't one for the Editor Lite v4 to the best of my

...dongle with you to be sure you get the proper pin-number connector. Connect the bridge to the Reader/Writer dongel by connecting the two pin ends. The drivers should automatically install once you ...

...dongle is plugged into the same USB port as when its installation. 2. Check the operating system compatibility of your embroidery software and your computer. What is your computer's OS? If you have ...

...the ancient Artista software into a modern machine so I know it can be done. Just need to have the proper hardware support. If all your trying to do is communicate with the machine from the PC then ...

...says. I have Windows 7 - any help will be greatly appreciated. Thank you. 3D will not run properly on a Windows 7 computer.The USB reader/writer will work fine with 5D software.Trust me, I ...

...proper reply is Keep Looking! If you have registered your software you MIGHT be able to purchase a replacement dongle, but I would not hold out much hope for that. Contact your HV dealer and ask. ...

...may not have the proper driver for the dongle. If you are on a newer operating system, it is also likely that the older version of the software are no longer compatible with newer operating