Question about Singer Sewing Machines
Needle position knob moves back and forth, but the needle doesn't, is it fixable? My nob moves back and forths with the aid of my hand
rolled it with a controlled force back and forth. when the needle comes out flip your machine to where you could open the bottom part and remove/clean the threads tangled on the bobbin! place some OIL
Question about Consew Sewing Machines
...needle position lever will move back and forth by itself. I want to buy the part and fix it. Is there info or video on fixing this? see if this link helps you out. ...
Question about Sewing Machines
...very similar. There is a possibility that your adjustment lever has screws came loose. 4. By moving the needle arm back and forth you can monitor what is going on to get a clue of what may be
...needle plate back into place. (go from front to back while inserting). It should catch your bobbin case and lock it into place. Hope this helps. If not I would suggest you take it in for repair. Good ...
...moving it the needle moved. This helped us. Hope it helps you. [email protected] if you have questions. hi have you recently refilled bobbin if so you will need to reclutch .....hold hand wheel and ...
Question about White Sewing Sewing Machines
...moving back and forth under the needle plate. There may be jammed threads in it if it is not moving. Not sure about your machine but most needles plates either flip up or can be unscrewed to check ...
...needle bar can be rocked back and forth by half a millimeter but can't be moved up and down. Finally got bobbin and needle out, but still can't unjam the machine. sometimes when a ...
...needle) plate and see if you can find the culprit. If so remove it. If not, try to rotate the wheel back and forth bit by bit and sometimes it will get loosened where it will move freely. Another ...
600 questions posted
Usually answered in minutes!
64 Questions
168 Questions
165 Questions
144 Questions