...thread bunches the tension is off ?? bottom thread bunches underneath side of fabric when sewing. Sounds like it could be! Probably worth trying to readjust it. Are you using a fine fabric too? That ...
Question about Brother Sewing Machines
...thread bunches up. what to do? when sewing the top thread is okasy but under where the bobbin thread sews on material it bunches up and the machine does go smoothly. remove the thread and bobbin.take ...
...bottom thread is bunching or looping it means the top tension is too loose or the thread may not be in the take-up lever. If you're top tension is set between 4 and 5 and it's still bunching, there ...
Question about Brother Sewing Machines
...bunches of thread or if i i also made sure the bottom thread is coming up with sewing needle and pulled back ... Most likely your top thread is not threaded correctly. Unthread and rethread. Check ...
...After clearing out the tangle, I now cannot get my machine to pick up the bobbin thread. I have an Advance 7422. thread bunches up in the bottom of my singer style-o-matic 328k singer sewing ...
Question about Sewing Machines
...thread is bunching up on the bottom of my project, was working fine, needle broke, I have re-threaded and still bunching up and freezing my project, please advise increase the needle thread tension ...
Question about Brother Sewing Machines
Thread keeps on bunching up on the bottom side of the fabric The stitching on the bottom of the fabric is bunching up and uses tons of thread try changing the needlecheck the top thread tension to ...
bottom thread bunching up BOTTOM THREAD BUNCHING UP WHEN SEWING. FAFF CREATIVE 1475 CD TRIED TO REGULATE UPPER TENSION AND BOBBIN TENSION check presser foot is down
...bottom of the material being sewn the thread is bunching up. I suspect it is the bobbin thread. The top of the material is sewing fine except when you look at the underside. What can I do? Thread the ...
...thread bunches up on the bottom causing machine to stop simple singer 2263 I would start by looking for a problem with the bobbin tension. Do you have the bobbin threaded through the case correctly? ...
217 questions posted
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
144 Questions