...need to raise the pressure foot lever, put your fingers onto the pressure foot and press downwards, it should unclip.To put one on, place the pressure foot onto the needle plate under the pressure ...
...needles are hitting on the pressure foot, need to know how to move foot over Unscrew pressure foot and replace or use finer needles, and make sure they are not bent or that the zig zag is ...
...pressure foot on sewing machine. where is pressure foot This is the foot that comes down and holds the fabric layers under the needle. There will be a pressure foot lever to raise and lower the ...
...need help in using it. Can you give me instructions? How do I thread it, etc? JoEllen Hi JoEllen, The walking foot replaces the normal pressure foot on your machine. There is a screw on the left-hand ...
Question about Sewing Machines
...pressure foot. I am needing to get a higher lift on my pressure foot so I can sew a zipper in a leather jacket. When I think 'higher lift' and leather - I think 'less pressure on the material' Ergo, ...
need to get the foot up high...all you have to do is reach through and grab the pressure foot and while picking it up(not the lever but the foot itself) turn it clockwise just a touch and it will stay
Question about Sewing Machines
...pressure on it I need to know how to adjust. I tried to adjust the height by the adjusting the foot buy loosening the screw by the reverse lever? I am NOT familiar with your Singer model 211, BUT.... ...
Question about Sewing Machines
...need to adjust the presser foot pressure of your machine. Lighter weight fabric is more difficult to feed, therefore the pressure needs to be increased. (Heavy weight fabric will sometimes push the ...
...yr anniversary, model 132Q, we need to find a presser foot are u talking about the pressure foot that u use to sew with or a pressure foot control... any low shank straight stitch foot should
...pressure on the material. Tighten the screw and try your machine without a needle to see if the material will move. Now, try other thicknesses of material. The rod may need to be slightly adjusted a ...
148 questions posted
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
165 Questions