Question about Platinum Sewing Machines
...rolled hem I imagine that you are trying to put something like rope in the hem to make a round edge You can buy a 1/2 foot that allows the needle to get close to what ever is making the roll see your ...
...rolled edge: Remove the left needle and thread.Open both the front and side covers.Raise the presser foot and the upper knife to the highest position.Clear the stitch fingers.Push the stitch with ...
Question about Husqvarna Sewing Machines
...Edge Stitch Foot
or
http://www.husqvarnaviking.com/accessories#1814
In actuality, almost any flat presser foot will work that is wide without any ability to roll edges, pintuck, etc. You ...
...to use wooly overlock thread on at least the top looper so this "fills" in the rolled edge. If you visit you-tube and search using "Rolled Hem" or Nancy Zieman you should find some helpful videos
Question about Singer Sewing Machines
...foot to the edge of the coil, and stitch. https://blog.colettehq.com/tutorials/tutorial-installing-an-invisible-zipper You can probably find the zipper foot from this vendor. ...
...do a rolled hem on very fine fabric how can I do a rolled hem on very fine fabric on my elna overlocker There should be a special foot for this procedure. I run a straight stitch near the edge
Question about Sewing Machines
...keep on breaking an don't know if I need something else to make a roll seam of just settings. thank you. You need to have a special foot for making a roll edge and feed the fabric into ...
Rolled-Hem foot. This has a spiral in the middle and is used for rolling and sewing hems neatly. 4. Zipper Foot. This has no gap as the needle goes to one side or the other of the foot. It usually has
...edge into the funnel of the foot and carefully feed the fabric into the foot as it sews. Practice a few times with some long scraps to get the hang of how much to fold in and you will rapidly
Question about Sewing Machines
Looking to finish edges og sheer material & need to know settings I've lost my manual aznd don't know what presser foot or settings to set my machine to in order to roll the edges of a sheer scarf. ...
8 questions posted
Usually answered in minutes!
17 Questions
12 Questions
5 Questions
1 Questions