...Examine your serger book for how to re-engage the blades. If they are engaged, make sure they are aligned correctly. If that still doesn't help check for
...serger keep breaking. All so the blade is not cutting the fabric. I have changed the blade and it still does not work. Check to make sure you have the right size needle for sergers. Your blades may ...
...serger and have changed the blades before but this time when I changed them I can't get them to align correctly. the top blade comes down and hits the bottom blade. I cant figure out what happened, ...
...to get all bits out of there, being careful and not hitting the loopers. You can knock them out of alignment with thread jams and such. If it just stopped and you cannot turn the wheel, then it
SERGER TO FEED THE FABRICK THROUGH THE KNIFE AREA AND IT IS BUNCHING UP FABRIC AT THE END. I NEED HELP FAST AND CAN'T FIND MY MANUAL. Your knives may be blunt and need sharpening or replacement. Check
...cutting blades and i cant get them to go back on machine what am i doing wrong? I am assuming that you have a serger. Which one? Make sure that you are putting the right side to the machine. Your ...
Question about Husqvarna Sewing Machines
...serger Thried to serge material that was too thick. the machine started clacking and cutting poorly. I adjusted the travel on the upper cutter and it seems to work, but I would like to adjust it to ...
...cutting blades on Bernette fun lock 007d Normally, only one blade on a serger can be replaced by a user (assuming a replacement blade can be found). If both blades should be replaced, then a ...
154 questions posted
Usually answered in minutes!
175 Questions
46 Questions
36 Questions
24 Questions
21 Questions