Euro-Pro 9120 Computerized Sewing Machine "shark bobbin problems" Questions

...bobbin I have a Shark 9110 that won't tread up a bobbin, it doesn't even start to spin the bobbin when it comes up as an error The same thing just happened to me, but I am miising a piece that fell ...

...shark is jammed can't turn the wheel, removed bobbin and lock housing but can't get the wheel to turn If you have taken out the bobbin case and the raceway the machine should move, if it does ...

...Shark.  No matter how I adjust the upper thread tension, I have the same problem, although if I hold the tension completely open the top comes out fine and the bottom is full of knots and extra ...

...Shark sewing machines suggests that you unthread the machine, remove the bobbin, clean the bobbin chamber, turn off and leave unplugged for 45 minutes and put it all back together again. The previous ...

Shark Euro Pro sewing machine. Thread shreds and then breaks at needle. What tension should I have? Sound as if your tension is to tight. you have to play with it to get it adjusted, be patient. I had

My bobbin winder will not turn and wind the bobbin. I have taken it to a reputable repairman and he says the bobbin-winder motor has a loose pully but there is no way to get inside to fix this. Help! ...

Consew 255rb-1 Problem is once a while the tread jame under the bobbin case. After sewing as started it can go on or if you stop and re-start it could be OK or it will start jamming again and have to ...

...Shark did not come with one and I am having problems threading and with the Bobbin. Please Help Me. Shannon Go to this address http://www.euro-pro.com/europro/faqdetail.aspx?modelno=998B It does not ...

my machine has a problem with bobbin tension.we installed every thing as given but sometimes we are not getting any stitch make sure the bobbin thread goes through the tension spring. if that's ok, ...

I have a euro pro sewing machine but the bobbin is not picking up. What could be the cause? I have rewrapped the bobbin and changed the needle try changing the needle, also could be a timing problem ...