Question about Sewing Machines
...go through the needle hole isn't going through the needle eye. Hello Mim Carpenter The needle threader on the Creative Vision 5.5 requires that the needle be in the full "up" position and in the the ...
NEEDLE GO THROUGH IT OR NOT? PLEASE ANSWER.THANKS! check that you have the correct needle some machines use a needle with a flat side that correctly aligns the eye with the hook and others just have a
Question about Sewing Machines
...the threader. ... My needle is up as far as it will go I can't get it to go up any further and it's the needle threader still will not hit the eye of the needle please give me an idea what I can
Question about Consew Sewing Machines
...go back in. Check the needle clamp or set screw to make sure it isn't in the lock-in position. Also look closely for lint or thread in the needle holder. (I'm not familiar with your brand of machine, ...
...go and tighten the needle clamp screw." "Removing Needle: Unplug the machine. Turn the handwheel counterclockwise to raise the needle bar to its highest position. Loosen the needle clamp with the ...
the needle keeps breaking and the thread wont stay threaded. the needle is not going straight up and down but it goes down and gets stuck almost usually a 3-5 inch thread tail is helpful to keep the ...
...go,then tighten the needle clamp screw also make sure the needle & thread will work togeather Cut 6-8 inch piece of thread of the spool you are going to use for your project Take the needle you ...
...needle go towards in a 215 model? the flat side should face the back of the sewing machine here's a tip I learned about needle & thread compatibility from a needle & thread expert . Cut 6-8 ...
Question about Brother Sewing Machines
...go, then tighten the needle clamp screwCorrect needle insertion is mandatory for proper use of sewing machine.Raise the needle bar to the highest point, then loosen the clamp screw to remove the old ...
Question about Janome Sewing Machines
Needle won't go down completely. Pulled bobbin &holder, clean. Worked yesterday with same settings, needle and thread. Problem above needle, not below. Help? Janome DXL 603. Seldom used. Hi Laszlo. ...
57 questions posted
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions