Husqvarna Huskylock Computerized 905 "viking timing adjustment" Questions

I have a Husqvarna Viking 100. How do I adjust the bobbin tension? U do not recomend that you adjust the bobin tension, what do you have the top tension set at? It should be between 3 and 4, have you ...

...timing issue. It will need to be adjusted by an authorized Husqvarna Viking dealer or they can send to Husqvarna Viking (SVP) Technical Service Dept in Tennessee for them to do the repair. A list of ...

...adjustment dial. The spring needs to be adjusted--probably down slightly. I would recommend taking it to authorized Husqvarna Viking dealer for repair. This is not something that can be done by the ...

needle hitting stitch plate on my Viking Lilly 545 recently had it serviced, was sewing fine Viking Lilly 545 recently serviced. Has been sewing fine, now today I go to sew and needle is hitting ...

...Viking 425 not forming stitches Not forming stitches 1. Make sure there is bobbin thread. 2. It is very important to have the bobbin thread with the right tension setting. This is done by hanging the ...

Poor tension on a Viking Topaz 20 I have a Husqvarna/Viking Topaz 20 embroidery machine that is having major tension issues. I can manually adjust but I shouldn't have to be doing this every single ...

husqvarna viking, interlude 435...unable to solve tension problem using a regular stitch, i can pull the top thread out without any problem. i have tried tightening my tension, (both thread and bobbin

...Viking emerald 183? I don't own an Emerald, but I am pretty sure there will be a button for it. It is usually represented by what looks like a twisted strand of DNA. The adjustment will be shown on ...

...adjustment needs to be made. The adjustments are ever so slightly. It could be that the needle bar is twisted causing the D needle to hit. It could be the looper is not within the specs for proper ...

...viking huskvarna 205. I have checked the bobbin threading & it is ok, the hook is in place but when the needle is in the "down" position the hook is not near the needle. I suspect that the timing is ...