Husqvarna Viking 1 "motor overload sewing machine" Questions

...motor stopped and will not run after attempting to sew heavy fabric. Overload Viking: The machine has a built in overload protector, if your needle can?t penetrate, it may stop the machine from ...

...for a bit then say overload when not overloaded with fabric The message means that the motor is drawing too much current. Could be a mechanical bind or the motor itself is worn out. Hope that

...motor. No Turn = "Overload" error. How it Presents: From the overload error: If you turn the motor shaft by hand first, then pressed the foot peddle it would run, but there was a "sweet" spot where; ...

...motor overload '' message pops up. It then takes days before I can sew again. The longest period of time I can sew is about thirty minutes. Usually I am sewing cottons. The overload message is usuall ...

...motor overload Getting error message of main motor overload then screen goes blank and reboots. I'm not familiar with the Diamond machine but suggest the following. The motor is overheating. Is the ...

...places and it still says overload I'M NOT FAMILIAR WITH THIS KENMORE BUT I WOULD CHECK THE BELT TO SEE IF IT IS STUCK, NOT ALIGNED OR TOO TIGHT. IF IT IS TOO TIGHT THE MOTOR WILL ALWAYS BE

...motor overload please wait If it's a Huskylock Serger it means the machine is in a "bind," possibly think fabric, etc. The motor is "overloaded" and shuts down. If it continues after serving for a ...

... Huskylock 936 States Overloaded and won't sew. What does that mean? The shaft is getting stiff and motor can't turn it. Try taking the bottom off and cleaning the fuzz out. Use alittle oil on all of ...

overload message comes on and it will not sew. what is my problem? try changing the needlerethread the machine top & bobbinmake sure the fabric is moving smoothly between the presserfoot & the

elna stitch craft 4000 sewing machine What is wrong if my machine says "Overload" and won't stitch? could be a motor problem or computer problem