Husqvarna Viking 1 "bobbin thread gets tangled" Questions

...it in place, power up your machine. Keep holding the thread as you begin spooling the bobbin. Let go of the thread once the bobbin starts to spin a few rounds and the thread should not get

...bobbin thread gets tangled while sewing the lower bobbin thread is just getting knotted and tangled. Tried winding bobbin again and cleaning inside? try changing the needle --make sure the needle is ...

...bobbin thread that's getting tangled, and I can't figure out why, or how to fix it. Any ideas? It could be that the bobbin is being put in upside down check to make sure that you do not need a bobbin ...

...bobbin thread comes up and the directions tell me to pull the "tail" to the side, so I do. I work the foot pedal and about three stitches later it stops. I open the shuttle race cover and pull the ...

...bobbin thread will not pull up and when trying to the needle seems like it gets stuck down there It sounds like you haven't threaded the bobbin thread correctly. Remove bobbin, bobbin case. If it is ...

...bobbin the thread from the lower bobbin is getting tangled when it starts. The needle is not grabbing the lower thread either and making a tangled mess. What can we do? check the needle first.Bent or ...

...have routed the bobbin thread properly. Also, if the bobbin case is not installed properly it will give you this problem. Ensure that the protrusion is touching the spring on the body of the

thread be tangled. Also, the bobbin could be threaded improperly in the shuttle hook. Rethread the bobbin in the shuttle hook. How to detangle a thread--- When a machine stops operation due to tangled

Thread gets tangled underneath Start sewing and thread gets tangled around the bobbin post around the post? is the bobbin and bobbin case in the machine?

thread. After cleaning the bobbin case, insert the bobbin case properly. If the needle is bent or broken, replace the needle. Then, thread the upper thread properly, and continue the operation. I also