Husqvarna Viking 1 "bobbin case huskystar" Questions

...bobbin case for a Huskystar 207 that was given to me. They lost the bobbin case. It is still brand new and I would like to use it. Thanks for helping me! On eBay: BOBBIN CASE No Backlash Husqvarna ...

bobbin case, usually caused by the needle going through it, you will continue to turn it until the rough spots are smoothed off.  I scrape the rough areas with a knife so the edges are smooth and

Bobbin Case Spins - in Huskystar C20 I broke a needle, so i took off the plate of my huskystar c20, took out the bobbin & then the bobbin case (to find the other half of the broken needle). Then put ...

...207 sewing machine have you checked to may sure the bobbin is turned the right way & insertedin the bobbin case the right way?try changing the needle --flat side goes to the back of the ...

...bobbin case. try changing the needle--flat side goes to the back of the machinecheck the thread take up lever & see if the thread is still on itit's also possible that the machine is out of ...

...case. (It's more common for the unit to fail when the bobbin winder spindle is moved to the right.) See page 13 of the manual which is currently available here: ...

...bobbin case. push needle all the way to the left. Turn handwheel toward you watching the needle and bobbin housing hook. The point of the hook should line up right above the eye of the needle. If not ...

...bobbin case makes a half turn then slows and causing the machine to 'stutter' When turning the wheel by hand it feels like it grinds through half of the cycle try lubricating the drive- you may ...

...bobbin is threaded correctly & inserted in the bobbin case or shuttle correctly Check tension 3 or 4 is usually good after you try all this & it keeps jamming then it may need to be ...

Bobbin case keeps on breaking on my Husqvarna Huskystar C20 I've had a problem with my Husqvarna Huskystar C20 since the I first bought it. The bobbin case keeps on breaking. I've had it repaired 3 ...