should it be turned... The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place
...bobbin case assembly I took apart the bobbin case assembly because the thread was balled up inside it. Cleaned and oiled the assembly. Now I cannot get it back together and cannot find a descriptive ...
...bobbin case on my singer feaherweight is stuck The machine won't stitch. Threads were stuck around the bobbin case. I could not remove the bobbin case; the machine seems frozen, so I tweezed all the ...
Question about Bernina Sewing Machines
...bobbin case. First, ensure that the thread is wound tight onto the bobbin (should not be spongy when you push your fingernail into into it) Looking at the open side of the bobbin case, insert the ...
Question about Singer Sewing Machines
...bobbin case is pictured there.on page 41, along with instructions. However, I can tell you that the feed dog plate with the two screws in is DESIGNED to be removed, and must be removed to get the ...
Question about Sewing Machines
...bobbin case carrier. Remove the bobbin case and bobbin. You will need to remove two small slotted head screws and remove the half circle locking ring that holds the bobbin case carrier in place. Try ...
...bobbin case. First, ensure that the thread is wound tight onto the bobbin (should not be spongy when you push your fingernail into into it) Looking at the open side of the bobbin case, insert the ...
...bobbin case so that the bobbin turns CW. Attach the bobbin case to the hook body from the machine. Wind a couple of revolutions of thread around your index finger with the assembled bobbin case and ...
bobbin case interferes with the interior portion of the bottom assembly and jams the thread. Anyone have ideas on what I have done wrong. The problem occurred when the all 3 pieces of the lower thread
Question about Kenmore Sewing Machines
clanking sound and all the bobbin thread gets snagged up around the bobbin case. you will need to get a new bobbin case assembly from singer as your bobbin lock lever has broken off; (a common problem
58 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions
