...and return to carrier. all parts fit but machine will not sew. Clean the carrier area - just a small amount of lint can inhibit the seating of the bobbin's latch, which then jams during
Question about White Sewing Sewing Machines
...try releasing the bobbin case and removing it. When my machine jams, removing the bobbin case releases all those threads that are twisted and knotted inside that are "holding the needle captive."
...persits, the timing may need adjusting. This should be done by the sewing machine tech for Kenmore. Sewusa.com has a guide for this in the repair section, but you could end up with more
bobbin case area and the same thing keeps happening. Now what should I do? Could be a few things. Absolutely minutely check that the top thread is threaded properly. Otherwise, it could be: Old thread
Question about Sewing Machines
...sewing a stich The upper thread gets knotted up with the bobbin thread around bobbin holder and will not sew. Tried cleaning bobbin area but it still happens. Machine is refurbished but new. It will ...
...lint, and left behind stuff, and see if that doesn't fix your problem. If it's been a while since you have taken it in for a "tune up", it should be done if you use your machine often. Happy
...bobbin area and stops my machine because of huge clumpy knots on the inside of the bobbin area and the underside of my material Try these suggestions 1. Change the needle--use a needle that's for the ...
Question about Bernina Sewing Machines
...knotting below my fabric and into bobbin area. Every time I start sewing, the thread gets tangled up on the bottom of my project and tugged down into the bobbin area, breaking the thread most of the ...
sewing machine and turn the machine wheel by hand. Watch what happens thru the plastic window in the bobbin area, or if you don't have a plastic window leave the bobbin covering off. Is the thread
...knotting up on the underside check the bobbin case tension--turn the screw to the left to tighten ---turn the screw to the right to loosen also check the needle to see if it's damaged also make sure ...
39 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions