Husqvarna Huskylock Computerized 910 "serger tension problems" Questions

...Tension serger kenmore Problems With the Tension on a serger kenmore Open the tensions (set at zero) and have the presser foot up when threading. Make sure the antenna if fully extended. Turn the ...

...serger threaded correctly? 2. Is the needles inserted correctly? 3. Is one of the needles bent or damaged? 4. Is the tension adjusted too tightly? 5. Is the tension adjusted to accommodate thickness ...

...serger has auto-tension, raise the presser foot as this also opens the tensions. Begin threading from the right as indicated in your manual or on the door of the serger. If this continues, the serger ...

...serger threaded correctly? 2. Is the needles inserted correctly? 3. Is one of the needles bent or damaged? 4. Is the tension adjusted too tightly? 5. Is the tension adjusted to accommodate thickness ...

...tension settings. Turn the handwheel so the loopers are at their highest position. There may be a mark on the side of the serger to match up with a mark on the hand wheel for this. Open the front of ...

...tension for a 3 thread wide serger stitch sergering with knits. what tension do I use The tension depends on the thickness of the knits. Have you checked with the manufacturer about this problem? ...

normal can you help Most problems with a serger can be fixed with a few simple adjustments to either the needle or the serger tension dials.Find helpful tips here ! before buying a sewing machine

...real solution for your serger, but keep in mind that stitches on the bottom of the work reflect upper thread tension problem, while top stitches are a problem of the bobbin tension( FOR THE MOST

...tension , upper or lower this thread keeps breaking , HELP Serger thread breaks 1. Is the serger threaded correctly? 2. Is the needles inserted correctly? 3. Is one of the needles bent or damaged? 4. ...

...serger threaded correctly? 2. Is the needles inserted correctly? 3. Is one of the needles bent or damaged? 4. Is the tension adjusted too tightly? 5. Is the tension adjusted to accommodate thickness ...