Question about Sewing Machines
...switch is not working. It automatically goes to the reverse position and will not dial down to any widths. the forward /reverse control sets the stitch length(width) the closer to neutral the smaller ...
...reverse switch? You need to specify the model that you are using... In may machines, there is no special reverse switch. The same lever that sets the stitch length, sets the reverse. Simply, ...
Question about Kenmore Sewing Machines
Reverse Switch Control on my Kenmore Sewing Machine The reverse switch control lever does not seem to be working. the machine only sews in reverse. Can you give me some suggestions that might help ...
Question about Singer Sewing Machines
Reverse Stitch Switch. You only need 3 stitches in reverse to start and end a seam. https://www.manualslib.com/manual/364676/Singer-Izek-1500.html?page=17&term=Reverse+Stitch+Switch&selected=1
Question about Bernina Sewing Machines
...reverse.However everything about the my Bernina 1130s is working. The machine does stitch forward. Ther is a micro switch inside the machine that likely has to be replaced, and/or the "0" position of ...
Question about Sewing Machines
switch Left and middle needle position 18 Stitches 4 Step buttonhole Stitch width control 4.5mm Maximum stitch width Soft cover 4.5mm Maximum stitch length Reverse stitch Twin needle Free arm Carrying
Question about Bernina Sewing Machines
switch reverse sewing back to statight stitch how do I change reverse sewing on bernina active 210 maschine to return to straight stitch Perhaps the manual would be helpful: BERNINA activa 210 Support
Question about Sewing Machines
...reverse switch to my machine so I can lock stitches? Most machines have a reverse button. If yours doesn't, you can sink the needle in the fabric, raise the presser foot, then spin the fabric 180 ...
...reverse switch on c007 seruba machine May be wrong here, but if it is an industrial machine, most do not have a reverse stitch. Also, if it is an overlock machine, have never seen one with a reverse. ...
...reverse switch? where Depends on your machine. Consult your owner's manual. On a lot of older machines, the Stitch Length Selector will reverse if the lever is pushed all the way up. Some really old ...
186 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions