wont sew straight stiches when zig zag regulator is set to 0 stitches are still not completely straight. tried adjusting the zigzag regulator with no success.any suggestions? it's possible that it
Question about Sewing Machines
...a brand new needle. If it still won't pick up the bobbin thread, then the machine's timing has probably been knocked out of alignment. Search for sewing machine timing or take it for service.
...wont go up and down with the wheel. I have tried looking in the machine, but I can't find any thread jammed. machine was working fine when suddenly it just jammed up. Everything seems to be fine, but ...
machine wont sew it keeps notting underneath Remove the top thread completely from the machine.
ALWAYS RAISE the presser foot and rethread from the beginning.
Verify it is threaded correctly.
...sewing machine and either i cant figure out how to tread it or it just keeps jamming. how do i make it so it wont get jammed? Hello, Give these solutions a try. * Un-thread your machine and remove ...
...wont work properly . It fails to complete the stitch and gathers under the cloth. It also breaks. The top thread is correctly threaded but the bobbin threas is only ok for 4 or 5 stitches and then it ...
Wont pick up Why wil it not pick up the bobbin thread to complete the stitch Do this by turning the wheel by hand. The bobbin thread will make a small loop on the way up. Move something thin from ...
sewing machine, it will not stitch. No problems in the bobbin case or anywhere else. When I try to use the reverse/back switch, the machine doesn't do anything, either. No beeps or anything else. Many
Question about Kenmore Sewing Machines
...what's going on inside. Those wheels are run by belts - likely one is worn out, and it's no big deal to buy a new one, and install it yourself! Whee! I remembered the right end of any sewing
186 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions