...noise. Bobbin case makes a scratchy noise when sewing, worse at higher speeds. When I 'pretend' to sew without the bobbin holder in place to try and diagnose where the noise is coming from, ...
Question about Sewing Machines
...bobbin the machine is now making a loud noise it was not making before. What could be causing the the loud noise? you may have over wound the bobbin the bobbin may not be inserted correctly into the ...
Question about Brother Sewing Machines
...bobbin thread and making a noise, take it for service. It most likely has a needle/hook timing issue and the noise could be the needle making contact with the needleplate or in the bobbin area. ...
...bobbin case too, remove and clean up this area. If very dirty, use methylated spitit on cloth or cottonbud (QTip) to remove grime (don't soak) Bargainbox I NHAVE A JUKI SEWING MACHINE IT IS MAKING A ...
...noise from bobbin area I have a Janome MC4800 that is 12 years old. It makes a "gonging" noise from the bobbin area when the stitch length is set at 2.6 or higher. I have cleaned the bobbin ...
Question about Brother Sewing Machines
...is turning I am pushing the bobbin to the left but the machine is making a whirring noise and the bobbin is not moving it will be the rubber ring. part xc 4076020 mine has just done the same
...into the bobbin case & see if that helpsor it could be something is wrong with the hook & hook race-if the machine keep making the noise I suggest having the machinechecked at a repair ...
Question about Sewing Machines
...noise. Machines can have different bobbin setups (top vs side loaded, etc) ... but what might help you diagnose the issue is to remove the needle and manually rotate the machine with the needle plate ...
...noise when I start sewing and swallows the fabric try a new needle--one that is for the fabric being sewed clean under the needle plate and in the bobbin area for lint rethread the machine top and ...
Question about Singer Sewing Machines
...making noise while winding the bobbin. It is also possible that there may be a problem with the bobbin winder mechanism itself. I would recommend checking to make sure the clutch is engaging and ...
186 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions
