Question about Sewing Machines
...top thread after 6 inches Help! .. If your machine is mechanical (not computerized), it could very well benefit from a good cleaning and oiling, including the internal mechanical movement. Squeaking ...
...top thread tension to 3 or 4 also rethread the machine just in case the thread is hung up somewhere take the bobbin out & put the bobbin in reverse of what you did before you said you changed the ...
top thread breaking especially when machine in reverse. try this The machine is not threaded correctly--rethread the machine The thread tension is to tight--reduce the thread tension (lower number) ...
...thread on the spool (if so, flip the spool over so the notch is on the top).
====
Those knobs on the front are most likely:
1) stitch length selector
2) stitch width selector
3) ...
...top and thread keeps breaking I have the memory craft 300 e and I cant find the instruction book For Staight Stitch. Ideal When adjusting top thread the Higher the number (on the little wheel) the ...
Question about Juki Sewing Machines
...Top-stitch needles have a larger scarf that will protect the thread as it pierces the fabric multiple times before forming a stitch. A Top-stitch or Metafil needle has a larger eye to accommodate ...
...top thread breaking when you sew? Then your problem is not the bobbin but the top tension. The mess of threads under the fabric is called "thread nesting" and is caused when the top tension is too ...
...top thread tension on 1? this sounds way too loose, should be 4 or 5. This is a horizontal top loading bobbin machine isn't it like the Janomes? Do you have a manual for it? It sounds to me like ...
Question about Bernina Sewing Machines
...breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too tight 7. ...
Question about Brother Sewing Machines
...top thread is between the tension plates and not around the thread behind the plates the thread tension is close to correct when you need a bit of a pull to pull it along to the needle is the method ...
754 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions