Question about Kenmore Sewing Machines
...up without the bobbin thread. Tension on both needle & bobbin are great & am using a new Kenmore needle. Help! Have boyscout pants to hem for today. you could have a timing problem with the
...needle bobbin carrier interaction now turn the machine over by hand and watch the needle go down and start to come up at this point the hook of the bobbin carrier should be very close to the needle ...
...Bobbin thread is ending upon top change the needle--Correct needle insertion is mandatory for proper use of your sewing machine.Raise the needle bar to the highest point, then loosen the needle clamp ...
...needle clamp screw 2.upper tension may be to tight--try 3 to 5 3.thread may be hanging up in bobbin case--check area for loose threads or lint ã?? Lower thread breaks The most probable cause of ...
...bobbin, the needle is not picking up the bobbin thread. Instead, it is coming in front of the bobbin? What can I try to fix this? Make sure you get a new needle, put it in RIGHT. usually flat side to ...
...Needle hits bobbin holder and doesn't grab the bobbin thread. It will break the needles if persisted. Is the needle all the way up in the holder? Have you checked the timing with the bobbin and the ...
...needle on a flat surface to see if it's bent or not 4.thread may be hanging up in bobbin case--check area for loose threads or lint ã?? Lower thread breaks The most probable cause of lower ...
Question about Singer Sewing Machines
...to fix. I would recommend contacting Singer for further assistance. Check also the upper tension path from the upper bobbin to the needle is threaded correctly, or the thread tensioner is not too ...
...fine for the needle Bobbin thread breaks 1. The bobbin thread is not threaded properly in the bobbin holder 2. Lint has collected in the bobbin holder 3. The bobbin is damaged and doesn't turn ...
...bobbin does not feed needle does not hook the bobbin thread creating a steach try rethreading the machine top & bobbinmake sure the bobbin is wound correctly & inserted into the bobbincase ...
754 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions
