Husqvarna Designer I "dog feet sewing machine down" Questions

...feet only hold the fabric against feed dog so themachine can use the needle to sew the fabric.if the fabric is not moving then the feed dogs have to be checkedcan you see the feed dogs in the needle ...

...feet thats under the faberic when sewing) if the feed dogs  will not go up or down, even when the lever is movedthen the machine needs to be serviced, in case a part has come loose or ...

...feet work with the machine, then the needlebar has probably shifted. It may be best to take it for service as it may require specific tools and gauges to adjust it properly.

...

...to get back feeder feet under presser foot clicked down not sure how to get them raised up again to start feeding fabric throught again The switch for the FEED DOGS is on the left side of the

the feet will not push the material thew the machine (and no the dog feet are not down) Hi, I suspect there is no pressure on the presser foot. Check that. Hope this is it. Rick

Material will not feed Check to make sure your dog feet are not down. If they are lowered the fabric will not move.

I have a New Home Harmony 2039 sewing machine and the dog feet have dropped down so they don't pull the material through. Help. -Adjust foor tension. See what happened..? Good luck Mai

feet just go up and down not in a pulling motion I'm sorry to say that it sounds like you have a broken gear that is preventing the feed dogs from moving properly. Depending on the machine, this could

material not being fed through. Gripper feet not going up and down just back and forward. This is a sewing machine Remove the needle plate and clean the lint from in between the fed dog teeth. sewman7

...machine...cannot get it to darn or embroidery work. I covered feed dogs with the plastic cover but cannot find a lever to put down the feet. With presser foot lever down (no feet and not foot holder ...