Husqvarna Designer I "change past" Questions

change the bobbin tension so it is correct and not bunching? You can probably check the owner's manual online. I have done that in the past, but my machine is a Singer model. SorryI can't be more help

singer 5102 I can figure out how to change the belt.... I can't get past the crank wheel. You will have to get to the pulley on the motor to slacken it off to make the belt loose to pop it off

how do i thread my sewing machine if it doesnt how do i thread the bobbin on my sewing machine if it doesnt feed properley Place the bobbin flat on the table with the thread winding clockwise (comes ...

I have a Brother innovis 4000d sewing and embroidery machine. The embroidery pattern l am trying to sew has worked really well in the past, but now when it starts to sew it is not picking up the botto

...change the B button skips from "1" to "3" and I cannot input needle designations for the design. "2" is not even an option I don't want to go jerking on all the plugs randomly. Hope someone knows ...

...change the needles and thread it. The foot pedal only makes noise and doesn’t move the needles either. Any suggestions? Force the hand wheel in the normal direct of travel to break past that jam. You ...

...letter. Switch to that drive letter and then highlite all the files on the CD drive Click copy. Change to the drive letter of the stick and then paste the files onto the

Futura ce 100. Changed computers and can't get past the ''cops'' Futura ce 100. Changed computers and attempted to reinstall. Basic works until installation attemts for AutoPunch and/or PhotoStitch. ...

the thread in the needle has started to snap after a few stitches. I am sewing curtains with thermal linings. finished one curtain ok. problem with second one. could it be needle. When I've had this ...

...well. sewing machine how to Adjust the bobbin tension Google Search Be careful with bobbin tension changes! I've messed up my bobbin settings in the past. ALWAYS MARK the original setting BEFORE ...