Husqvarna Designer I "adjust belt tensioner" Questions

Question about Kenmore Sewing Machines

My vintage kenmore hand wheel was frozen now it turns manually but not when I use the foot pedal, then it won't turn

...belt or have to adjust the motor/belt tension. 1. The motor can be loosened by a couple of bolts. This allows the motor to be moved to adjust the tension of the belt. 2. The tension can be adjusted ...

Question about Singer Sewing Machines

1 Answer

How to replace a belt on singer model 223 machine

...of the hand wheel. Put the new one on. While you are moving the motor to adjust tension on the belt you should have the motor running so that you can adjust where the motor has the least

Question about Singer Sewing Machines

1 Answer

Bernina 830 tension belt old how do i adjust the

...belt old how do i adjust the belt tension so it does not slip Remove the end cover. The tension mechanism will be visible. Loosen the screw, apply some tension, retighten the screw. Quite easy to

Question about Bernina Sewing Machines

1 Answer

Change drive belt

...pulley position. By pulling the belt toward this 7 o'clock position, the pulley tension can be adjusted and then tightened by means of the fixing screw. _____________ 5. It is important to know ...

Question about Brother Sewing Machines

2 Answers

Belt came off

belt.adjust not so tight after adjusting try to run manually first by turning handwheel freely if the motor will run freely with out obtruction no power supply.If your satiesfied try to run with power

Question about Singer Sewing Machines

1 Answer

Handy stitch

...Belt? Cannot Seem To Adjust the Tension What to Do About a Gumming Up Needle How Tighten My Bobbin Tension, Please Is it Covered Under Warranty? Proper Threading Instructions? Just a Foot Pedal? ...

Question about Sewing Machines

1 Answer

Installing the hook and bobbin assembly.

Question about Sewing Machines

1 Answer

How to install belts on sewing machine 15814300 where do they go

...of the machine, to get at the belt. loosen the motor belt adjustment screw and mounting bolts , remove the belt and refit the new one , Adjust the belt tension to specs. retighten and refit ...

Question about Singer Sewing Machines

1 Answer

How do you change the belt on a Singer 7462?

...cover, or the turning wheel cover, you will be able to see the belt. If the belt is not broken, then try to adjust the belt tension, by adjusting either the height of the motor, or the tension

Question about Sewing Machines

1 Answer

I have a quantrum XL-100 and i cannot adjust

...adjust tension or decrease tenision on th side wheel that turns to begin machine to sew. The tension for the motor belt is adjusted by loosening and altering the position of the mounting bracket of ...