Janome Harmony 2039 Mechanical Sewing Machine "loopy bobbin thread stitches" Questions

...bobbin thread. Usually loopy thread under the fabric is excess upper thread. If so, generally it means: Replace with a brand new needle. Use good quality thread (not fuzzy, old thread or bargain bin ...

bobbin thread that is loose & loopy. Usually, loopy thread under the fabric is the upper thread--which, if that is the case, is an indication it is either threaded incorrectly or the upper tension

...loopy stitch. Keep the bobbin case clean as built-up lint can cause stitching problems. .There is a little screw attached to the bobbin carrusel. You can try to turn it just a little bit. The reason ...

Bobbin stitch is loopy I have re-threaded the bobbin and machine at least 20 times and the bobbin stitches are still loopy. What should the tension be set at? It is a Singer Touch-Tronic 2010 4 is the

...machine, but if you do not sew frequently; it's easy to mis-thread the bobbin. Did your bobbin thread wind properly onto the bobbin (not loose or loopy). That too, can be a problem. Best of luck. ...

bobbin is all loopy in the stitches Always thread the sewing machine with the presser foot up. This allows the thread to properly enter the tension control. If the thread is not in the tension control

...loopy mess and bobbin thread can be easily pulled out as it isn't stitched at all This is sometimes caused by the upper thread not threaded correctly. You need to thread it first with the pressure ...

...thread, the bobbin case should slowly drop about an inch at a time. If it's too tight, loosen the Larger (closest to where the thread comes out) screw on the side of the bobbin case about 1/16 of a ...

bobbin problem is sometimes the threading of the top thread. If you threaded the machine with the presser foot down, the tension is closed and the thread cannot enter as it should. Improper seating of

...loopy thread. Is it really the bobbin thread, or is it the top thread looping under the fabric? FWIW, stitch problems appearing under the fabric are usually top thread issues, stitch problems on top ...