Janome Harmony 2041 "sewing machine needle stuck" Questions

...foot is stuck in down position so that needle is under plate of machine. Cannot lift it with handwheel. It is stuck in down position. sounds like the machine froze up, machine needs to be ...

sewing machine needle is stuck and the machine will not move. I am hemming a pair of jeans and the needle got stuck and now the machine won't move. I think the needle is bent or broken. What should I ...

...sewing cotton fabric. After rewinding and replacing a bobbin I tried to sew again and the needle wouldn?t move at all. Machine is making a ?starting noise? but it is just stuck. I tried to manually ...

...jam when running the machine, the part under the plate moves and hits the needle making it impossible to sew stuck the whole machine the needle did not move .needle and wheel handle both are ...

...sewing machine. The needle is stuck and won't go past the needle plate. It had just hit the needle plate and the needle was bent, however I replaced the needle and now it will not go past the ...

Needle shaft stuck. Machine won't work. Needle shaft stuck. Have removed bobbin and bobbin case, needle, foot. cleaned, oiled but still stuck. Cannot move round turning thing on far right. How to fix?

holder stem. At the very top of the needle, there is a screw that points horizontally to the right. Loosen that screw and the broken needle should fall out. How To Change Your Sewing Machine Needle ..

...machine? While I am sewing, the needle frequently gets stuck below the guide plate and the only way to get it loose is to remove the guide plate. How can I permanently fix this problem? If the needle ...

...sewing my machine stopped and read to check for bent needle, cloth too thick, or something stuck in the machine...no bent needle, cloth not too thick nor stuck in bobbin plate, my take up lever will ...

...is hitting, most likely your machine has been knocked out of time (which frequently occurs when the needle strikes something it shouldn't). Search for sewing machine timing or take it for service.