Janome 4623 Mechanical Sewing Machine "stitch upside down" Questions

...stitch, it now stitches upside down. The zig-zag stitch is actually on the underside of the fabric. HELP Sounds like the needle alignment is out. This website has some instructions on how to properly ...

...upside down! Very frustrated! Bottom stitch keeps showing on the TOP of the fabric as I sew... TOP stitch keeps showing on bottom. Have tried adjusting thread pressure, using highest quality quilting ...

...a straight stitch. Help! I have the settings correct, but something didn't return to normal... The stitch selector switch is most likely the culprit. Have you tried operating the machine upside

...stitch You push on the backstitch button. It's the button that looks like an upside down U. If all it does is take a few tiny stitches back then stops...you need to look at the screen...to the upper ...

The stitching looks like the bobbin is upside down; that is what my 25 year old singer looked like when bobbin was upside down. The tread tension may not be probably tighten.

...be one half of the design. One design will be upside down from the other. That's the way it should be. After stitching out one side of the design, turn the hoop, and stitch the upside down

Safety device has been activated The stitches for zig Zag and all utility stitches are upside down. The zig zag is on under side?

stitch keeps coming aloose how do i fix it I lost the manuel Whenever i start sewing the string keeps coming off DId you drop it try turning it upside down and see if it will create stitches this way.

...same way as if fitted upside down or back to front will cause jumping and missing stitches also make sure the bobbin it fitted in it case the shape of 9 if not it will not sew properly hope this ...

...stitch is fine but the topside is loose so that the stitching doesn't hold. It's very possible the bobbin is in upside down and the thread is coming out of the lower tension. Pull on the thread and ...