Janome 4623 Mechanical Sewing Machine "needles hitting plates" Questions

how to adjust placment of twin needle so it doesnt hit edge of bobbin holder? twin needle is straight; however, it hits the edge of the bobbin holder on my Kenmore Sewing machine. This is my first ...

needle breaks because it hits the area around the bobbin. Hello, Here are a few things to check. You may have checked some of these already but it may be worth checking again. * When you insert your ...

My Singer 6160's needle is hitting the bobbin plate. Can't figure needle setting. The needle keeps hitting the bobbin plate. first change the needle--flat side to the back of the machine, ...

...needles are hitting the metal. Is it possible that the looper has bent? Hello, Here are a few things to try. * When you insert anew needle, make sure it?s positioned correctly. Usually with the flat ...

THe needle hits the base plate about 1mm on the far side of the hole. You may have the stitch setting on the left/right(depends which side it hits) setting, or the needle is un-noticeably bent. ...

...needles Hello, Here are some solutions to try. * When you insert your new needle, make sure it?s positioned correctly (usually with the flat side away from the bobbin, but consult your manual), that ...

Needle hits the plate and bends. What would cause this? The machine seemed to work fine before, but now the needle hits the plate when sewing. I'm assuming something is causing the needle to ...

The needle hits the throat plate The needle misses the hold where it should go through and hits metal one the throat plate. I fixed the sewing problem, it was a belt. if a new needle still wont align ...

my needle keeps hitting the throatplate, (I have broken 2). It was working fine. I don't know what I have done to cause this! e. Hello, First, check the position of your needle.Machines with zigzag ...

Neddle hits the plate, how do i fix it ? check that the needle is fitted correctly check for bent needle check for correct needle First, check what plate is inserted and what stitch is in use. There ...