Janome 4623 Mechanical Sewing Machine "needle loose" Questions

...loose threads or lint the needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or lint upper tension may be to tightthe needle may be bent or ...

needle. A.To correct loose stitches, try the following: (1) Balance the thread tension. If the stitches are loose on top of the fabric, decrease the tension to the next lower number. If they are loose

...loose try changing the needle Correct needle insertion is mandatory for proper use of your sewing machine.Raise the needle bar to the highest point, then loosen the needle clamp screw to remove the ...

...needle clamp screw is loose 6. Top tension is too tight--loosen off one letter or number till the stitchlooks normal7.make sure that every thread guide is used when winding the bobbin,, so ...

...in my Juki HZL-F300. The thread guide has come loose. Had it replaced, but loose again and now needle won't go in. Please send me a picture of the needle bar where you put the thread guide back

...needle tension is too loose or the bobbinthread, too tight, as shown in the bottom drawing at right.2 Nov 2008 Understanding Thread Tension - Threads ...

...hitting bobbin loose needle incorect fitment of needle incorrect needle for machine needle / hook timing incorrect If you haven't already, install a brand new needle. A bent needle will cause

loose thread on bottom of fabric and locks up needle Change needle Clean under needle plate where feed dogs are for lint Clean bobbin area for lint or loose threads Rethread machine top thread make ...

...2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too tight 7. Machine could be out of ...

...needle comes loose. I presume something has worn on the machine. Is this a common problem? How can it be fixed? If it's a simple solution as I'd like to deal with it myself. It took Pfaff a month to ...