Janome 4623 Mechanical Sewing Machine "bobin stitch right" Questions

...stitch Could be any one of these .- 1) check needle is in right direction. 2) if needle in right direction, check that the crochet hits the needle at the right spot. 3) check the tension on ...

stitch is looping. I have adjusted the tension on the bobbin and also the topstitch tension but neither have made a difference. NEVER adjust the bobin tension, you will need to take it to the shop now

...back in, I made sure the actual bobin was turing the right direction so the cotton didnt snag and pull casing up. If you havent already tried this give it a go.Its amazing how much gunk gets in

...bobin too) This sounds like you have one of two things going on: 1. the tension, probably upper, is too tight or the thread is looping or catching along the way somewhere...ie threading isn't ...

...stitch length blowing half a can of air through the bobin case and related parts (the machine has been recently serivced in terms of time between use so shouldnt need oiling or anything yet) varying ...

...bobin. You can also try to use a different foot (my machine comes with a satin stitch foot)and or slow the speed of your feed dog. Sometimes a very fabric does need some sort of backing, a tear away, ...

...right bobins. I can't get it to work without eating the thread in the bobin. many thanks I need one sent in the mail, Let me know how much. [email protected] Go to www.singerco.com and under customer ...

...bobin as well as sewing. Not able to find my manual. thanks, I keep my thread tension at a 3 and that keeps my material from bunching up but i also keep my stitch length at a 2 1/2 . Hope that

...right. The needle seems to stick, and the bobbin jumps a lot. This happens sometimes when I use the decorative stitches, but not a lot. I usually have the tension set at 2 for decorative stitches. ...

...bobin tension pl help There is an upper tension adjustment on the top of your machine usually located around the tension disks. And, there is a tiny tension screw on the side of the bobbin case. You ...