Janome Memory Craft 4800QC "needle keeps" Questions

...keeps hitting the needle plate cause it clicks when needle comes up. I thought I fixed it the last time by removing the housing where the needle go in but that was only a temporary fix. Do I have the ...

...keeps on snapping when i sew straight stitch. i sew about 10cm, it snaps and have to keep re-threading? try changing the needleCorrect needle insertion is mandatory for proper use of your sewing ...

my needle keeps falling out I replaced the screw but still I cant keep the needle in Have you changed needle type? Is the needle lock screw out far enough to allow the needle to go up high enough?

...needle in my Mylock 634d keeps on breaking & I cannot see where or what is causing it to happen. I have checked & rechecked the threading of the loopers and the needles. I agree with John Smeed It ...

...needle keeps hitting the bobbin plate. first change the needle--flat side to the back of the machine, make sure the needle is inserted all the way up into the needle holdermake sure it's the ...

...keeps breaking. Having used the automatic cutter, the thread pulls up and out of the needle when I want to start sewing again. Also the machine sounds like a tractor! rethread the machine try a top ...

...needle keeps breaking i have change new needle but the top thread keeps breaking though i have change tension and put new thread Needle breaks 1.the needle is damaged 2.the needle is not correctly ...

Needle keeps falling out of Pfaff Creativ 2170 I use this machine for embroidery and recently the needles have been falling out of their holder. I insert the needle the correct way and tighten the ...

...keeps breaking and comes out of the needle The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle ...

...keeps showing up.we are making dresses for a wedding and need the machine to work properly...help would be appreciated is the bobbin threaded correctly ?is the bobbin warped?try rethreading the ...