Janome Memory Craft 5700 "feed dog down" Questions

...feed dog lever again if you can move the feed dog lever andthe feed dogs respond going up and down then you know thatthe feed dogs are working and are not brokebut if they do not respond then they ...

feed dog is stuck The feed dog is stuck in the down position, and it will not adjust to the higher position when I adjust the feed dog control. Thanks I have the same problem...this is a work around, ...

...feed dog so themachine can use the needle to sew the fabric.if the fabric is not moving then the feed dogs have to be checkedcan you see the feed dogs in the needle plate area are the up or down? do ...

...feed dog I have a Viking 6690 that belonged to my mother. I cannot find the instruction manual and can't get the feed dogs to come up. She was quite the quilter so I suspect that they were lowered so ...

feed dog is down. The computer said look for lever to move it but I do not see a lever in back of this old serger to raise the feed dogs. This machine was recently serviced. Does anyone know where the

...feed dog is stuck down,m the lever just does nothing. It lowered feed dog, then was useless when I went to raise it to position. your machine will have a flip type opening at the very front of your ...

...down feed dogs go down.try to find this one,if you can't try to see uder the machine if there a loosen parts behind shuttle race holding feed dogs.tighen this up.hopefully this could help you,have a ...

feed dogs down on my machine? I want to do embroidery for a project and I need to put the feed dogs down but I can find the switch or button to do that? It has two turning devices on the side but they

...Feed Dog is rising normally. Any thoughts please? Does the F Dog wear out in any way? Generally, the lighter the fabric weight, the heavier the presser foot pressure. Yes, feed dogs do wear with use. ...

...hand-wheel forward and the feed dogs will come up. (Providing you have the feed dog switch to the up position). it's very possible that the feed dog lever or knob is damaged & needs to be ...