Janome Memory Craft 9000 Computerized Sewing Machine "turns" Questions

...maching - hand wheel hard to turn manually and wont turn electronically EuroPro 420 foot pedal only turns the wheel a half turn then seems to lock up. I then go to turn the wheel and it is extremly ...

When I try to hand turn the hand wheel it turns about half way around then gets hard to turn. Are you turning it towards you or away? If, you are turning it away from you, you will mess up your timing

Hand wheel won't move.Scissorbutton wont work. Repairing a Janome or New Home Sewing Machine ... www.thriftyfun.com/Repairing-a-Janome-or-New-Home-Sewing-Machin... Question: Memory Craft Machine Won't

Flywheel won't turn forward I have a Bernina 730 and the flywheel won't turn forward to raise or lower the needle.I can turn it bachward. Dan You must have a small piece of thread stuck in the raceway

...something is locked. First remove the needle and bobbincase.Then try turning the hand wheel.If it turns easily replace the bobbincase and try turning it by hand.If it still turns easily then put in ...

...model # 648 touch n sew machine ,the bobbin holder isnt rotating when turning the hand wheel, but turns when turning the bottom drive shaft, the top drive shaft also turns when turning bottom

I can't get the bobbin tension adjusted right. The bottom thread is too loose no matter which way I turn or how far I turn the tension screw. Machine? most tension screws have nothing to do with ...

COMPUTER CRASHED I NEED TO RELOAD CD BUT I DONT HAVE ACCESS CODE There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2.

motor is fine, but won't sew Hasn't been used for 20 yrs, hand wheel turns manually, have oiled everything, hand wheel starting to turn slowly although very stiff. needle barely moving up ...

...notes on the state of my machine, in case they matter: When I turn the flywheel, the coupling knob turns with it, and the needle rises and falls. When I turn the coupling knob without touching the ...