Question about Sewing Machines
Thread underneath loose after running machine for more than 10 minutes, starts off perfectly but after wards thread underneath starts too loosen up! Help please! Are you sure which thread is loose?...
...thread underneath. Tried fixing the tension on the bobbin thread as they state in the manual, but the problem still persists. Any suggestions? If the thread is looping underneath, you're top tension ...
...underneath (from the bobbin) is looping and loose. I pull the thread from the bobbin and there is no tension. If the thread is loose on the bottom of the fabric, it's actually the top thread is too ...
Question about Sewing Machines
underneath stitch is real real loose, I tried adjusting stuff, still is so loose I have to cut it and begin again, thanks Is your top thread not pulling the bobbin thread up? This would be top tension
...on top and another loose straight thread lying underneath fabric. it's possible that the machine is out of timeyou can check with youtube or fixsewingmachines.com for video's on the ...
...underneath the thread is wobbly underneath but good on top of material change the needlerethread the machine on top--make sure the presser foot is lift to the highestpositionrethread the bobbin also ...
...thread is very loose, & bunching up If it is bunching and looping underneath, it's because either the machine isn't threaded correct on top or your top tension is too loose. For heavier sewing, your ...
...thread underneath is very loose and bulking up. Initially the tension was too tight, thats ok now. How do I tighten up the bobbing thread or the under sewing thread?? Thank you in advance, Nicole ...
...UNDERNEATH LINE OF STITCHING IS LOOSE . WHAT CAN DO TO REMEDY THIS PROB . Sounds like your upper thread tension is too loose. Try tightening the tension on the top thread, but first, make sure the ...
Question about Janome Sewing Machines
...thread underneath. I've re threaded, tried a new bobbin, cleaned the machine. Sounds like thread nesting (or bird nesting). Remove the top thread from the machine. ALWAYS RAISE the presser foot and ...
743 questions posted
Usually answered in minutes!
193 Questions
102 Questions
90 Questions
79 Questions