Janome Memory Craft 9000 Computerized Sewing Machine "nick com new" Questions

...com/blog/2015/03/how-to-adjust-sewing-machine-tension/

One last thing to check--look for any nicks or burrs in the bobbin area, ie the hook, the needle plate. Frequently, when a needle breaks, ...

...nick or burr or the incorrect size or type of needle. AVOID old or bargain bin thread! Why is my thread breaking http://www.servicethread.com/blog/stop-industrial-sewing-thread-breaks Sewing Machine ...

...new needle. Make sure the needle, thread, and fabric are compatible.

...

...com%2Flearning%2Fpdf%2Fschmetz-needle-chart.pdf&usg=AFQjCNHTR52AmqwzvyCjbXmD5Ch52Va5_Q All About Needles Always Raise the Presser Foot then rethread the machine from the beginning. Check that the ...

...new needle. Check that the needle is compatible with the thread and fabric--also that the needle eye is not too small for the thread. If the fabric is somewhat abrasive or tightly woven, it could be ...

...scrape any protruding bits off. If there are too many gouges, or they are too deep for this to work, you need a new bobbin case. I have purchased them from sewvacdirect.com for $20-30, plus

...com/g/b/manualtop.aspx?c=us&lang=en&prod=hf_se350eus That should help make sure you're using the correct size bobbins. Does this have a vertical bobbin? If so, there are a few things you can ...

...com is the Elna guru in USA.  If you aren't in USA, you may need to search locally for an Elna dealer, many parts for the Swiss machines are still available, just have to track down someone ...

...com%2Fall-about-needles%2F&usg=AFQjCNGsGZ5hl6pOJw4NdqTtkEIqlHZfuQ Another thing to check is if the upper thread is hanging up somewhere. Sometimes it will get wrapped around a thread guide or the ...

some nicks in it and when I try to do stippling the needle sticks to the nick in plate. I've gotton Janome 9000 needle plates at wwwifixmachines.com they have both updated and older versions available