Janome Memory Craft 9000 Computerized Sewing Machine "block full" Questions

Nothing seems to work. I'm mystified. Is your bobbin wound too full? is there any thread or fabric blocking that area

...in the plate beneath the foot. These feet, I slid. This allowed a full revolution. So I know what blocks the revolution is in the fabric feeders beneath the foot? there called feed dogs & if ...

block does blk, grey, white from condenser go to Have a look at this site. OK, it's in German but most of what you need will be here somewhere. The author is a bit repetitive and some of the links are

...full name into my 1+Husquvarna Sewing machine? I have the #1 and it should be similar in programming if not the same.  Instructions for the #1 (1200) -- Programming Block Letters (one model down ...

...lever part # 541700 slips off its lifter, drops down and inserts itself underneath the lifter, blocking the presser foot from going down again. I can push the tension releasing lever back into ...

...block with two cables leading from it. It's cables are bent at their ends indicating they were once connected to the connection points adjacent to the main power connection points (next to the main ...

... and then you stop winding; at least this is how it works on the 8000. Perhaps there is some thread blocking the thread guide for the bobbin ...

...as you guide the machine over the seam. I also suggest that you Fan your seam allowances where your blocks come together. You can see how that is done here. ...

...using the wheel. Bernina Bernette 66: I sewed multiple layers of fabric and suddenly the machine blocked. I managed to pull out the fabric and thread but now the needle does not move up or down. ...