Needle timing. Ihave a Model Ese2 . I have a quarter inch foot with a very tiny hole for the needle. I forgot to change the needle setting to the middle and broke my needle. They say that threw off my
Timing the needle need to adjust to adjust timing so that the needle does not hit the bobbin That isn't the timing. If the hook is hitting the needle the hook is too far left - or close to the needle.
...timing of the needle and hook. With the needle over to the left, and when it is on it's up stroke, you want to see the hook tip passing behind the needle just above the eye of the needle. If it ...
Question about Sewing Machines
...a difference, the the timing is probably the problem. The needle is arriving at the bobbin at the wrong time to connect with the bobbin thread. Search for sewing machine timing or take it for
...needle/hook timing issue (the needle is arriving at the bobbin at the wrong time to connect with the bobbin thread). There are many web sites and videos explaining sewing machine timing. Or you can ...
...timing, ie the needle is arriving at the bobbin at the wrong time. This happens frequently when the needle hits a pin or a dense piece of fabric, deflects the needle, which hits the bobbin mechanism, ...
needle bar timing...it could have been knocked out of timing when the first needle was broken. Please, tell me how to correct the needle bar timing on my machine. I live appx 65 miles from the nearest
...needle bar does not move. Loosen the two timing screws on the hook pulley (only loosen them 1/4 turn). Move the hook to line it up with the needle. Tighten the screws and recheck the timing. The feed ...
259 questions posted
Usually answered in minutes!
565 Questions
102 Questions
90 Questions
79 Questions